General Information

Important Safety Notes:

• Check the inside of the larger pieces in your box for other materials packed inside.
• When assembling components, place them on a non-abrasive surface (i.e., shipping box) to avoid scratching.
• We recommend an area approximately 5' x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.

Returns:
If you wish to return your product, please contact us first — we can often help resolve the issue right away.
If a return is still necessary, it must be initiated with the retailer where the product was purchased.

Need Help or Replacement Parts?

Although great care has been taken to ensure proper packaging and handling of this product, occasional issues can occur.

If you need replacement parts, assembly assistance, or have questions about the product, our customer service team is happy to help.

• Website: https://parts.nychbrands.com
• Email: support@zippity-outdoor.com
• Phone: 704-892-5222 or 877-234-6196

Customer service agents are available 9am–5pm EST, Monday–Friday. Leave a voicemail if outside of business hours and it will be returned within 1 business day.

For Quick Assistance:

• Have reference item number ZP19078
• Provide the specific part name
• Include the batch lot number (stamped on the end of the box)

Product Specifications:

• Dimensions: 33¼" W × 55¼" L × 41" H
• Distance between slats: 6¾"
• Multiple post, slat, bungee, hinge, and spacer components for customizable storage
• Includes towel hooks, floor boards, slats, bungee cord system, and adjustable rail slat

Power Drill and Drill Bit

Required for a smoother installation experience.

A — Post A (1)

2¾" × 2¾" × 41"

B — Post B (1)

2¾" × 2¾" × 41"

C — Post C (1)

2¾" × 2¾" × 41"

D — Post D (1)

2¾" × 2¾" × 41"

E — Long Bottom Board (2)

1¾" × 7⅜" × 52"

F — Short Bottom Board (2)

7⅜" × ⅞" × 30½"

G — Floor Boards (14)

1½" × ⅞" × 30¾"

H — Short Slats (6)

3" × ⅞" × 30½"

I — Long Adjustable Slat (1)

3" × ⅞" × 47¾"

J — Long Slats (5)

3" × ⅞" × 52"

K — Spacer K (4)

⅞" × 1¼" × ⅜"

L — Spacer L (4)

3½" × 1¼" × ⅜"

M — Spacer M (2)

4¼" × 1¼" × ⅜"

N — Spacer N (23)

6¾" × 1¼" × ⅜"

O — Post Cap (4)

2¾" × 2¾" × 1"

P — Towel Hook (3)

Q — Bungee Bracket (6)

R — Rail Hinge (2)

S — Post Hinge (4)

T — Long Bungee (1)

U — Short Bungee (2)

V — Short Self-Drilling Screw (4)

¾" Long

W — Long Self-Drilling Screw (36)

2½" Long

• Slide Spacer (L) to the bottom of Posts (A) and (B) until they meet the post caps.

• Assemble on box or other smooth surface to prevent scratching.
• Align Posts (A) and (C) as shown.

Top Down View

• Install Long Bottom Board (E).

• Ensure that the wheel is inline with the Long Bottom Board (E).

• Use (4) Long Self-Drilling Screws (W) to secure the long bottom board.

Tip: Ensure Long Bottom Board (E) is pushed to the back of the post channels to keep square.

• Repeat Steps 2-3 for opposite side using Posts (B) and (D).

• Repeat Steps 3-4 to create second panel.

• Install Short Bottom Boards (F) into Posts (B) and (D)

• Secure using (4) Long Self-Drilling Screws (W).

• Stand both frames upright.

Tip: Ensure boards are pushed to the back of the post channels.

• Secure using (4) Long Self-Drilling Screws (W).

• Install (14) Floor Boards (G) onto the lower frame.

• Install (6) Spacers (N) into designated posts.

• Rotate so that the wheels are on your right hand side.

• Install (2) Spacers (K), (2) Post Hinges (S), (2) Spacers (M), and secure using (2) Long Self-Drilling Screws (W).

• Install (2) Short Slats (H) and (2) Long Slats (J).

• Install (8) Spacers (N) followed by (2) Short Slats (H) and (2) Long Slats (J) into designated posts.

• Install remaining (2) Spacers (N), (2) Spacers (K), (2) Post Hinges (S), and fasten with (2) Long Self-Drilling Screws (W).

• Install (6) Spacers (N) into designated posts.

• Install (1) Long Slat (J) and fasten with (4) Long Self-Drilling Screws (W).

Tip: Ensure the metal insert is on the bottom for proper screw installation.

• Install (2) Short Slats (H) using (8) Long Self-Drilling Screws (W).

• Install (4) Post Caps (O).

• Install (3) Towel Hooks (P).

• Install (6) Bungee Brackets (Q).

Tip: Position brackets before attaching the bungee cord.

• Attach Long Bungee (T) and (2) Short Bungees (U) to bungee brackets.

Warning: Do not hook bungee cords from towel hooks.

• Install (2) Rail Hinges (R) to Long Adjustable Slat (I). Ensure long adjustable slat is pushed to the back of the rail hinge.

• Lower long adjustable slat in between posts.

Tip: For best fit, fasten hinges while the adjustable slat is on the organizer.

• Rail hinge has pre-drilled holes on the underside to fasten to the adjustable slat.

Tip: For easier access, place the adjustable rail in the lower position.

• Email: support@zippity-outdoor.com
• Phone: 704-892-5222 or 877-234-6196
• Text: 980-580-6508